Peel Ply Fabric Poliamid 80-83 gr/m2 Peel Ply Kumaş Poliamid 83 gr/m2 -plain EN:152cm PP80 is an economical polyester peel ply suitable for vacuum bagging of wet-lay laminates, resin infusion and hand-layup applications. It is compatible with a wide range of resin systems including epoxy, polyester and vinylester.
Vacuum Sealant Tape High performance vacuum bagging gum sealant tape used to create strong and reliable seals between pieces of vacuum bagging film. This vacuum bagging tape is suitable for use at room temperature and at elevated temperatures up to 150°C. Supplied on a single 15m roll.
Release Film is a general purpose P3 perforated release film suitable for use at temperatures up to 120°C R120-P3 is our recommended release film when vacuum bagging hand-layup laminates. The film offers excellent release from a wide range of resin systems including epoxy, polyester and vinylester. EN:130cm100B-25/P3
Vacuum Film 5M G-bag En:200cm Vacuum Film G-bag 65mic. The film is suitable for use up to a maximum temperature of 165°C. Vacuum Film 5M G-bag is a high quality, general purpose multilayer nylon vacuum bagging film suitable for conventional vacuum bagging, resin infusion and prepreg applications (for curing in our out of autoclave).
Breather Layer Cloth 5M 150gr/m2 EN:150cm Breather Layer Cloth is a 150gsm non-woven polyester/polyamide felt fabric suitable for use as a breather layer when vacuum bagging prepreg laminates or as a breather and soaker layer when vacuum bagging wet-lay laminates.
Infusion Mesh Extrude 5M 120Cm Flow Knitted Infusion mesh is a warp knitted polypropylene infusion mesh offering excellent flow media properties in conjunction with outstanding conformability over complex mould specifically as a flow media for more complex mould shapes. Will conform over contoured mould surfaces and into tight corners whilst still...
Vacuum Hose General purpose clear PVC vacuum hose for use in a wide range of vacuum composites applications. PVC vacuum hose will soften considerably and collapse at high temperatures and so this hose should NOT be used for any vacuum connections where the tube hose will be subjected to temperatures in excess of 80°C. For high temperature vacuum hose you...
Resin Infusion T Connector Applied to connect the flow tube in vacuum infusion and prepreg processes.
Peel Ply Fabric Poliamid 80-83 gr/m2 Peel Ply Kumaş Poliamid 83 gr/m2 -plain EN:152cm PP80 is an economical polyester peel ply suitable for vacuum bagging of wet-lay laminates, resin infusion and hand-layup applications. It is compatible with a wide range of resin systems including epoxy, polyester and vinylester.
Vacuum Sealant Tape High performance vacuum bagging gum sealant tape used to create strong and reliable seals between pieces of vacuum bagging film. This vacuum bagging tape is suitable for use at room temperature and at elevated temperatures up to 150°C. Supplied on a single 15m roll.
Release Film is a general purpose P3 perforated release film suitable for use at temperatures up to 120°C R120-P3 is our recommended release film when vacuum bagging hand-layup laminates. The film offers excellent release from a wide range of resin systems including epoxy, polyester and vinylester. EN:130cm100B-25/P3
Vacuum Film G-bag En:200cm Vacuum Film G-bag 65mic. The film is suitable for use up to a maximum temperature of 165°C. Vacuum Film G-bag is a high quality, general purpose multilayer nylon vacuum bagging film suitable for conventional vacuum bagging, resin infusion and prepreg applications (for curing in our out of autoclave).
Breather Layer Cloth 150gr/m2 EN:150cm Breather Layer Cloth is a 150gsm non-woven polyester/polyamide felt fabric suitable for use as a breather layer when vacuum bagging prepreg laminates or as a breather and soaker layer when vacuum bagging wet-lay laminates.
Infusion Mesh Extrude 5M 120Cm Flow Knitted Infusion mesh is a warp knitted polypropylene infusion mesh offering excellent flow media properties in conjunction with outstanding conformability over complex mould specifically as a flow media for more complex mould shapes. Will conform over contoured mould surfaces and into tight corners whilst still...
Vacuum Hose General purpose clear PVC vacuum hose for use in a wide range of vacuum composites applications. PVC vacuum hose will soften considerably and collapse at high temperatures and so this hose should NOT be used for any vacuum connections where the tube hose will be subjected to temperatures in excess of 80°C. For high temperature vacuum hose you...
Resin Infusion T Connector Applied to connect the flow tube in vacuum infusion and prepreg processes.
Peel Ply Fabric Poliamid 80-83 gr/m2 Peel Ply Kumaş Poliamid 83 gr/m2 -plain EN:152cm PP80 is an economical polyester peel ply suitable for vacuum bagging of wet-lay laminates, resin infusion and hand-layup applications. It is compatible with a wide range of resin systems including epoxy, polyester and vinylester.
Vacuum Sealant Tape High performance vacuum bagging gum sealant tape used to create strong and reliable seals between pieces of vacuum bagging film. This vacuum bagging tape is suitable for use at room temperature and at elevated temperatures up to 150°C. Supplied on a single 15m roll.
Release Film is a general purpose P3 perforated release film suitable for use at temperatures up to 120°C R120-P3 is our recommended release film when vacuum bagging hand-layup laminates. The film offers excellent release from a wide range of resin systems including epoxy, polyester and vinylester. EN:130cm100B-25/P3
Vacuum Film G-bag En:200cm Vacuum Film G-bag 65mic. The film is suitable for use up to a maximum temperature of 165°C. Vacuum Film G-bag is a high quality, general purpose multilayer nylon vacuum bagging film suitable for conventional vacuum bagging, resin infusion and prepreg applications (for curing in our out of autoclave).
Breather Layer Cloth 150gr/m2 EN:150cm Breather Layer Cloth is a 150gsm non-woven polyester/polyamide felt fabric suitable for use as a breather layer when vacuum bagging prepreg laminates or as a breather and soaker layer when vacuum bagging wet-lay laminates.
Infusion Mesh Extrude 5M 120Cm Flow Knitted Infusion mesh is a warp knitted polypropylene infusion mesh offering excellent flow media properties in conjunction with outstanding conformability over complex mould specifically as a flow media for more complex mould shapes. Will conform over contoured mould surfaces and into tight corners whilst still...
Vacuum Hose General purpose clear PVC vacuum hose for use in a wide range of vacuum composites applications. PVC vacuum hose will soften considerably and collapse at high temperatures and so this hose should NOT be used for any vacuum connections where the tube hose will be subjected to temperatures in excess of 80°C. For high temperature vacuum hose you...
Resin Infusion T Connector Applied to connect the flow tube in vacuum infusion and prepreg processes.
Peel Ply Fabric Poliamid 80-83 gr/m2 Peel Ply Kumaş Poliamid 83 gr/m2 -plain EN:152cm PP80 is an economical polyester peel ply suitable for vacuum bagging of wet-lay laminates, resin infusion and hand-layup applications. It is compatible with a wide range of resin systems including epoxy, polyester and vinylester.
Vacuum Sealant Tape High performance vacuum bagging gum sealant tape used to create strong and reliable seals between pieces of vacuum bagging film. This vacuum bagging tape is suitable for use at room temperature and at elevated temperatures up to 150°C. Supplied on a single 15m roll.
Release Film is a general purpose P3 perforated release film suitable for use at temperatures up to 120°C R120-P3 is our recommended release film when vacuum bagging hand-layup laminates. The film offers excellent release from a wide range of resin systems including epoxy, polyester and vinylester. EN:130cm100B-25/P3
Vacuum Film G-bag En:200cm Vacuum Film G-bag 65mic. The film is suitable for use up to a maximum temperature of 165°C. Vacuum Film G-bag is a high quality, general purpose multilayer nylon vacuum bagging film suitable for conventional vacuum bagging, resin infusion and prepreg applications (for curing in our out of autoclave).
Breather Layer Cloth 150gr/m2 EN:150cm Breather Layer Cloth is a 150gsm non-woven polyester/polyamide felt fabric suitable for use as a breather layer when vacuum bagging prepreg laminates or as a breather and soaker layer when vacuum bagging wet-lay laminates.
Infusion Mesh Extrude 5M 120Cm Flow Knitted Infusion mesh is a warp knitted polypropylene infusion mesh offering excellent flow media properties in conjunction with outstanding conformability over complex mould specifically as a flow media for more complex mould shapes. Will conform over contoured mould surfaces and into tight corners whilst still...
Vacuum Hose General purpose clear PVC vacuum hose for use in a wide range of vacuum composites applications. PVC vacuum hose will soften considerably and collapse at high temperatures and so this hose should NOT be used for any vacuum connections where the tube hose will be subjected to temperatures in excess of 80°C. For high temperature vacuum hose you...
Resin Infusion T Connector Applied to connect the flow tube in vacuum infusion and prepreg processes.
Resin Infusion Spiral Flow Infusion spiral is a spiral wound plastic tube which allows very easy flow or resin from the resin feed tube into and around a resin infusion project. Infusion spiral is typically positioned underneath the feed line directing resin flow into the further corners of the part.
Resin Infusion L Connector Applied to connect the flow tube in vacuum infusion and prepreg processes.
Resin Infusion Spiral Flow Infusion spiral is a spiral wound plastic tube which allows very easy flow or resin from the resin feed tube into and around a resin infusion project. Infusion spiral is typically positioned underneath the feed line directing resin flow into the further corners of the part.
Resin Infusion L Connector Applied to connect the flow tube in vacuum infusion and prepreg processes.
Resin Infusion Spiral Flow Infusion spiral is a spiral wound plastic tube which allows very easy flow or resin from the resin feed tube into and around a resin infusion project. Infusion spiral is typically positioned underneath the feed line directing resin flow into the further corners of the part.
Resin Infusion L Connector Applied to connect the flow tube in vacuum infusion and prepreg processes.
Resin Infusion Spiral Flow Infusion spiral is a spiral wound plastic tube which allows very easy flow or resin from the resin feed tube into and around a resin infusion project. Infusion spiral is typically positioned underneath the feed line directing resin flow into the further corners of the part.
Resin Infusion L Connector Applied to connect the flow tube in vacuum infusion and prepreg processes.